Chemical Forums
Chemistry Forums for Students => Physical Chemistry Forum => Topic started by: Twickel on September 02, 2012, 08:46:59 AM
-
Hi
I have a few questions that I am uncertain about.
At 353K the vapour pressures of benzene and bromobenzene are 757 and 66 mmHg respectively. Assume the mixture obeys Raoults Law, for a mixture with xbenzene=0.3, calculate the pressure at which this mixture will begin boil and then calculate the mole fraction of benzene in the vapour phase at this pressu
How do I go about calculating those? Which equations do I use?
Thanks
-
Start with a boiling point definition.
-
yiP=xiPisat
y1P=x1P1sat
y2P=x2P2sat
y1+y2=1
x1+x2=1
x1=0.3
7 variables
3 known x1 P1sat P2sat
4 unknown
4 eqns
Solve for P,y1,y2
-
Start with a boiling point definition.
I think boiling point is when the vapour pressure of the liquid is greater then that of the surroundings. All I have is this equation xB(gas) = PB/P = xB(liq)PB*/P
From a pressure vs mole fraction diagram, do I find the pressure at which the we hit the bubble point?
-
yiP=xiPisat
y1P=x1P1sat
y2P=x2P2sat
y1+y2=1
x1+x2=1
x1=0.3
7 variables
3 known x1 P1sat P2sat
4 unknown
4 eqns
Solve for P,y1,y2
I do not know any of those equations, what do they y's mean, is this the only possible way of solving this problem ( the pressure at which we boil)?
-
yiP=xiPisat
y1P=x1P1sat
y2P=x2P2sat
y1+y2=1
x1+x2=1
x1=0.3
7 variables
3 known x1 P1sat P2sat
4 unknown
4 eqns
Solve for P,y1,y2
I do not know any of those equations, what do they y's mean, is this the only possible way of solving this problem ( the pressure at which we boil)?
Raoults Law :'(
-
Ok, What I did was P benzene= 0.3 x 757= 227.1, P bromobenzene = 0.7x66 = 46.2
Total pressure is 273.3
I think thats the answer, but I don't know what this means, why is the pressure at which this boils the total pressure of the vapours?
-
I think boiling point is when the vapour pressure of the liquid is greater then that of the surroundings.
Equal, not greater.
-
thank you, I still do not understand why the total pressure is when the system begins to boil.
Also is calculating the mole fraction of benzene in gas just equal to 0.3x757/273. i.e Pbenzne/total presure
-
thank you, I still do not understand why the total pressure is when the system begins to boil.
You know the pressure of the vapor over liquid. You lower the external pressure till you come to a moment when the vapor pressure of the liquid equals external pressure - and that's the moment when the liquid starts to boil. Consult the definition.
Also is calculating the mole fraction of benzene in gas just equal to 0.3x757/273. i.e Pbenzne/total presure
Yes. Think about Avogadro's principle.
-
Thank you, I now understand.