[Nitrous]

Hi  Friends,
I am looking  for some typical formulation for EPOXY COATING, POLYESTER COATING, etc.
i searched  for it for many days but i didn't get any satisfactory reply .I hope the  people here are capable enough to reply for me.

Thank you....
AJU.. <a href="http://" target="_blank" rel="noopener noreferrer" class="bbc_link bbc_flash_disabled new_win">http://</a>

[P]

More info regarding what the coating need to do would be usefull. i.e. internal /external  coloured/clear waterbased/solventbased etc..   does it need to satisfy any particular performance properties?

Otherwise, just take a simple paint formulation and use your polymer as the binder.


The most simple example of a coating made from your polymer would be to dissolve it in some solvent and then paint it on.  You'll end up with a coating of your polymer on the substrate when the solvent evaporates off.

[Nitrous]

More info regarding what the coating need to do would be usefull. i.e. internal /external  coloured/clear waterbased/solventbased etc..   does it need to satisfy any particular performance properties?

Otherwise, just take a simple paint formulation and use your polymer as the binder.


The most simple example of a coating made from your polymer would be to dissolve it in some solvent and then paint it on.  You'll end up with a coating of your polymer on the substrate when the solvent evaporates off.

More info regarding what the coating need to do would be usefull. i.e. internal /external  coloured/clear waterbased/solventbased etc..   does it need to satisfy any particular performance properties?



Thank for your reply,

I dont want to formulate any specific coating. I just want to know, which resin is suitable for coating , what are the other ingredient included in the fiormulation.(General).
I am expecting a right response,
Thank you.



Otherwise, just take a simple paint formulation and use your polymer as the binder.


The most simple example of a coating made from your polymer would be to dissolve it in some solvent and then paint it on.  You'll end up with a coating of your polymer on the substrate when the solvent evaporates off.

[Nitrous]

Thank for your reply,

I dont want to formulate any specific coating. I just want to know, which resin is suitable for coating , what are the other ingredient included in the fiormulation.(General).
I am expecting a right response,
Thank you.


Aju....

[P]

Well, a standard paint type coating will consist of things along the lines of:

A binder - Your polymer which holds the system together and imparts features such as water resistance, flexibility, adhesion etc..
A solvent or carrier - to dissolve the polymer into liquid form  (or emulsify in the case of a waterborne)
Fillers and pigments - to impart colour (usually something like TiO2 for a white pigment) and to reduce costs (cheap chalky type fillers to bulk out the paint)
Surfactants - to help disperse the pigment, polymers and fillers.  Also to reduce surface tension to help coverage of the substrate (sometimes called leveling agents to remove brush marks  -  but in essence - surfactants.
Coalescing solvents - to help with film forming and frost protection.

Then any special additives: such as flame retardants, anti graffiti additives, shiny metallic particles, further adhesion promoters or anything else non standard to achieve a specific effect.



Is this the kind of thing your after??  You could try typing "paint formulations" into google to get loads more info.


P.



PS - many differant binders are used with various pros and cons.  Acrylics are popular for water resistance. Epoxies are indeed used. Polyureathanes. Various Co-polymers such as ABS etc...    Read arround a bit on google and you should find what you are looking for.

[gericox]

Search on http://ep.espacenet.com/advancedSearch?locale=fr_EP It's a patent data base
Using correct key words you'll find what you want