December 26, 2024, 08:18:44 AM
Forum Rules: Read This Before Posting


Topic: Quantitative precipitation of formic acid  (Read 6935 times)

0 Members and 1 Guest are viewing this topic.

Offline Peacock

  • Regular Member
  • ***
  • Posts: 16
  • Mole Snacks: +0/-0
Quantitative precipitation of formic acid
« on: August 04, 2010, 04:37:57 AM »
Dear All,

I am struggling to find a reagent that causes the quantitative precipitation of carboxylic acids, especially formic acid.  ???

It sounds like a textbook question, but I cannot find any. Could anybody with better knowledge give me a hand in this issue?

Regards

Offline Stepan

  • Chemist
  • Full Member
  • *
  • Posts: 358
  • Mole Snacks: +39/-4
  • Gender: Male
  • Air Chemistry Man
    • Supplier of air sampling equipment and services
Re: Quantitative precipitation of formic acid
« Reply #1 on: August 04, 2010, 09:43:10 AM »
To the best of my knowledge all salts of formic and acetic acids are highly soluble

Offline discodermolide

  • Chemist
  • Sr. Member
  • *
  • Posts: 5038
  • Mole Snacks: +405/-70
  • Gender: Male
    • My research history
Re: Quantitative precipitation of formic acid
« Reply #2 on: August 04, 2010, 11:45:04 AM »
Try a barium salt if you want it inorganic, otherwise use an organic amine, dicyclohexylamine for example.
Development Chemists do it on Scale, Research Chemists just do it!
My Research History

Offline Stepan

  • Chemist
  • Full Member
  • *
  • Posts: 358
  • Mole Snacks: +39/-4
  • Gender: Male
  • Air Chemistry Man
    • Supplier of air sampling equipment and services
Re: Quantitative precipitation of formic acid
« Reply #3 on: August 04, 2010, 05:11:14 PM »
Barium Formate and Acetate are soluble in water (>25g/100g). 

Offline Peacock

  • Regular Member
  • ***
  • Posts: 16
  • Mole Snacks: +0/-0
Re: Quantitative precipitation of formic acid
« Reply #4 on: August 06, 2010, 01:53:15 PM »
Thanks for your replies.

I intend to get rid of formate (formic acid) in aqueous solution at room temperature and also at pH 7.

I thought of precipitation as the most likely means of doing it. However, given your replies, I am wondering if there are other reactions formate can undergo in the above-mentioned conditions.

Could you come up with any?

Thanks

Offline Peacock

  • Regular Member
  • ***
  • Posts: 16
  • Mole Snacks: +0/-0
Re: Quantitative precipitation of formic acid
« Reply #5 on: August 06, 2010, 01:59:19 PM »
I forgot to mention that there is formaldehyde as well in the solution, and CO2, therefore I am not after a redox reaction. But of any other type.

Regards

Offline Stepan

  • Chemist
  • Full Member
  • *
  • Posts: 358
  • Mole Snacks: +39/-4
  • Gender: Male
  • Air Chemistry Man
    • Supplier of air sampling equipment and services
Re: Quantitative precipitation of formic acid
« Reply #6 on: August 09, 2010, 09:07:21 AM »
Depends on composition, volume as well as application, you can neutralize the solution and distill it into another vessel.

Offline Peacock

  • Regular Member
  • ***
  • Posts: 16
  • Mole Snacks: +0/-0
Re: Quantitative precipitation of formic acid
« Reply #7 on: August 09, 2010, 11:19:54 AM »
Right...

Isn't there a way to transform the formate (formic acid) without oxidizing or reducing it on the spot? without further processing?

I didn't know it would be so complicated... :(


Offline Stepan

  • Chemist
  • Full Member
  • *
  • Posts: 358
  • Mole Snacks: +39/-4
  • Gender: Male
  • Air Chemistry Man
    • Supplier of air sampling equipment and services
Re: Quantitative precipitation of formic acid
« Reply #8 on: August 10, 2010, 01:37:24 PM »
If you give us a better idea what you are trying to achieve (full picture), we might be able to find a solution. 8)

Sponsored Links