November 26, 2024, 12:20:36 PM
Forum Rules: Read This Before Posting


« previous next »
Pages: [1]   Go Down

Topic: how to separate two water soluble compounds with diff retention times in HPLC?  (Read 5924 times)

0 Members and 1 Guest are viewing this topic.

Offline Chaste

  • Full Member
  • ****
  • Posts: 101
  • Mole Snacks: +0/-0
how to separate two water soluble compounds with diff retention times in HPLC?
« on: September 05, 2011, 10:46:58 AM »
Hi all,

as above. are there any other methods beside using liquid chromatography?
Logged

Offline Stepan

  • Chemist
  • Full Member
  • *
  • Posts: 358
  • Mole Snacks: +39/-4
  • Gender: Male
  • Air Chemistry Man
    • Supplier of air sampling equipment and services
Re: how to separate two water soluble compounds with diff retention times in HPLC?
« Reply #1 on: September 05, 2011, 02:01:45 PM »
HPLC is the most expensive among all. LC is way cheaper, TLC even less expensive. Distillation, re-crystallization, re-precipitation, you name it 
Logged

Offline Chaste

  • Full Member
  • ****
  • Posts: 101
  • Mole Snacks: +0/-0
Re: how to separate two water soluble compounds with diff retention times in HPLC?
« Reply #2 on: September 06, 2011, 12:45:52 PM »
hi Stepan,

how exactly would you use TLC? can you give me some pointers please? just wanna add that these 2 compounds are unknown.
Logged

Offline Dan

  • Retired Staff
  • Sr. Member
  • *
  • Posts: 4716
  • Mole Snacks: +469/-72
  • Gender: Male
  • Organic Chemist
    • My research
Re: how to separate two water soluble compounds with diff retention times in HPLC?
« Reply #3 on: September 06, 2011, 12:55:48 PM »
Here is an example. This was the 5th hit on google for preparative TLC.
Logged
My research: Google Scholar and Researchgate

Offline Stepan

  • Chemist
  • Full Member
  • *
  • Posts: 358
  • Mole Snacks: +39/-4
  • Gender: Male
  • Air Chemistry Man
    • Supplier of air sampling equipment and services
Re: how to separate two water soluble compounds with diff retention times in HPLC?
« Reply #4 on: September 06, 2011, 06:44:02 PM »
Thank you Dan. Basically you separate your compounds on the plate, then scrape the spot with you compound off the plate, and extract your compound with appropriate solvent.
Logged
Pages: [1]   Go Up
« previous next »
Sponsored Links