December 25, 2024, 02:21:58 AM
Forum Rules: Read This Before Posting


« previous next »
Pages: [1]   Go Down

Topic: PerkinElmar Diamond DSC furnace lid locked  (Read 2255 times)

0 Members and 1 Guest are viewing this topic.

Offline maimam

  • Very New Member
  • *
  • Posts: 2
  • Mole Snacks: +0/-0
PerkinElmar Diamond DSC furnace lid locked
« on: July 13, 2015, 06:48:38 PM »
Hi
I am using PerkinElmar Diamond DSC. The furnace lid is some how locked. If some one suggest me how to deal with this problem.
Thanks in advance.
Ali
Logged

Offline mjc123

  • Chemist
  • Sr. Member
  • *
  • Posts: 2074
  • Mole Snacks: +302/-12
Re: PerkinElmar Diamond DSC furnace lid locked
« Reply #1 on: July 13, 2015, 06:57:07 PM »
I had a problem like this. It wasn't completely locked, but froze up at low temperatures. Turned out it was clogged with gunk from decomposing samples, and all it needed was a good clean. If you're confident about maintaining the instrument yourself, you can try this - start by removing those 6 screws and the plate, then dismantle the furnace cover. Otherwise - or if the problem is different - it's get an engineer in.
Logged

Offline maimam

  • Very New Member
  • *
  • Posts: 2
  • Mole Snacks: +0/-0
Re: PerkinElmar Diamond DSC furnace lid locked
« Reply #2 on: July 14, 2015, 01:10:48 PM »
Quote from: maimam on July 13, 2015, 06:48:38 PM
Hi
I am using PerkinElmar Diamond DSC. The furnace lid is some how locked. If some one suggest me how to deal with this problem.
Thanks in advance.
Ali
Logged
Pages: [1]   Go Up
« previous next »
Sponsored Links