December 23, 2024, 10:50:16 AM
Forum Rules: Read This Before Posting


Topic: Question in gases  (Read 1331 times)

0 Members and 1 Guest are viewing this topic.

Offline chimia12

  • New Member
  • **
  • Posts: 6
  • Mole Snacks: +0/-0
Question in gases
« on: November 12, 2020, 10:14:08 AM »
Hi,
I need help with a question.

This is what I tried:
https://pasteboard.co/JA213Ox.png

Generating gas (gas producer) is a type of gaseous fuel (gases whose combustion produces ceramic energy) which is produced by passing air or vapor through a layer of hot coal or another layer of flammable material extracted from coal. Such a gas has the following composition ( In volume percentages):


8.0% CO2, 23.2% CO, 17.7% H2, 1.1% CH4, 50% N2.


What is the density of gaseous fuel at 23 degrees Celsius and at a pressure of 763 mm Hg? (Answer must be given in units of gr / m3)?

Offline chenbeier

  • Sr. Member
  • *****
  • Posts: 1337
  • Mole Snacks: +102/-22
  • Gender: Male
Re: Question in gases
« Reply #1 on: November 12, 2020, 11:48:30 AM »
You have to convert the ideal Gas Law that you get Rho =.

combine pV= nRT, n= m/ M and Rho = m/V.

I think your calculation sounds ok, even calculated percentage of mass.

Offline chimia12

  • New Member
  • **
  • Posts: 6
  • Mole Snacks: +0/-0
Re: Question in gases
« Reply #2 on: November 13, 2020, 10:37:47 AM »
You have to convert the ideal Gas Law that you get Rho =.

combine pV= nRT, n= m/ M and Rho = m/V.

I think your calculation sounds ok, even calculated percentage of mass.
This what I did.
My final answer is wrong and I dont have the final soloution. I Dont know what I did wrong.

Offline AWK

  • Retired Staff
  • Sr. Member
  • *
  • Posts: 7976
  • Mole Snacks: +555/-93
  • Gender: Male
Re: Question in gases
« Reply #3 on: November 13, 2020, 11:04:03 AM »
Quote
(Answer must be given in units of gr / m3)?
AWK

Offline chimia12

  • New Member
  • **
  • Posts: 6
  • Mole Snacks: +0/-0
Re: Question in gases
« Reply #4 on: November 13, 2020, 11:22:44 AM »
Quote
(Answer must be given in units of gr / m3)?

Oyyy, thanks!

Sponsored Links