November 26, 2024, 11:15:55 PM
Forum Rules: Read This Before Posting


Topic: explosion at Military University of Technology in Warsaw  (Read 9927 times)

0 Members and 1 Guest are viewing this topic.

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27862
  • Mole Snacks: +1813/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
explosion at Military University of Technology in Warsaw
« on: February 14, 2008, 03:31:33 PM »
Could be it will not make its way to papers outside of Poland.

Graduate student lost today both hands and had his face burnt when conducting experiments. He was working on his PhD in explosives at WAT (Wojskowa Akademia Techniczna - Military University of Technology) in Warsaw. He was alive and conscious on arrival to hospital.

That's all information available at the time. As far as I know WAT has pretty good facilities and labs prepared for this kind of work. Even that is not always enough :(

Seems like accidents are the only kind of my posts in News section  :-\
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Mitch

  • General Chemist
  • Administrator
  • Sr. Member
  • *
  • Posts: 5298
  • Mole Snacks: +376/-3
  • Gender: Male
  • "I bring you peace." -Mr. Burns
    • Chemistry Blog
Re: explosion at Military University of Technology in Warsaw
« Reply #1 on: February 14, 2008, 07:37:06 PM »
Do have a link? An English link would be even better.
Most Common Suggestions I Make on the Forums.
1. Start by writing a balanced chemical equation.
2. Don't confuse thermodynamic stability with chemical reactivity.
3. Forum Supports LaTex

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27862
  • Mole Snacks: +1813/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline hmx9123

  • Retired Staff
  • Full Member
  • *
  • Posts: 897
  • Mole Snacks: +59/-18
Re: explosion at Military University of Technology in Warsaw
« Reply #3 on: February 16, 2008, 11:12:27 PM »
That sucks.  It depends on the safety controls in place, perhaps they were not enough, but sometimes s#*$ happens and it was unforseeable.  I wish the best for the guy.

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27862
  • Mole Snacks: +1813/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: explosion at Military University of Technology in Warsaw
« Reply #4 on: February 17, 2008, 05:50:13 AM »
I am browsing news services here but nothing else surfaced yet.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline hmx9123

  • Retired Staff
  • Full Member
  • *
  • Posts: 897
  • Mole Snacks: +59/-18
Re: explosion at Military University of Technology in Warsaw
« Reply #5 on: February 19, 2008, 04:53:33 AM »
If you find out any more, I'd be interested to hear the root cause of the explosion.

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27862
  • Mole Snacks: +1813/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: explosion at Military University of Technology in Warsaw
« Reply #6 on: February 19, 2008, 06:11:15 AM »
His PhD thesis was something like "Nanostructural explosives". From other sources - not clear whether he lost both hands or one, not clear whether he has not lost one eye.

I'll keep you posted, but you know how it goes - explosion is news, slow recovery is boring...
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline hmx9123

  • Retired Staff
  • Full Member
  • *
  • Posts: 897
  • Mole Snacks: +59/-18
Re: explosion at Military University of Technology in Warsaw
« Reply #7 on: February 21, 2008, 01:03:47 AM »
Nano explosives are the rage, but the problem is that there is a very real limit to the size of an explosive before it becomes non-functional (critical mass).  A shockwave must propagate through a certain amount of material (i.e., there is a 'run time') for it to fully form, and without this, it doesn't go bang.  Now, on the nanoscale, this won't fly, so they have to go for materials that do detonate on the nanoscale, and you are unfortunately left with primary HEs.  Those are dangerous monsters, and some are even point detonants.  One material I saw was a true point detonant; 8 mcg completely destroyed a DSC pan and analyzer (or whatever that name of the thing the pan sits in).  Had to buy a new part for the instrument.  Suck.

Point being (heh, no pun intended), if he was doing nano explosives, he may have been working with VERY sensitive and powerful material.  Not a good combination.

Offline hmx9123

  • Retired Staff
  • Full Member
  • *
  • Posts: 897
  • Mole Snacks: +59/-18
Re: explosion at Military University of Technology in Warsaw
« Reply #8 on: March 02, 2008, 04:52:13 AM »

Offline lipesa

  • New Member
  • **
  • Posts: 3
  • Mole Snacks: +0/-0
Re: explosion at Military University of Technology in Warsaw
« Reply #9 on: April 03, 2008, 03:51:46 AM »
Am very sorry about the incident. Is there a possibility that the burns were caused by chemicals reactions or its thermal heat?

Sponsored Links