November 13, 2024, 01:42:43 AM
Forum Rules: Read This Before Posting


Topic: hydrothermal conditions without an autoclave  (Read 7794 times)

0 Members and 1 Guest are viewing this topic.

Offline trinity23

  • Very New Member
  • *
  • Posts: 2
  • Mole Snacks: +0/-0
hydrothermal conditions without an autoclave
« on: August 06, 2008, 01:09:12 PM »
Hi all..

Can someone tell me how to maintain hydrothermal conditions: 200-250 C without having to use a titanium autoclave to grow my metal oxide.

Also, what is a titanium ultrasonic horn?
Is there any alternative for a vacuum evaporator? Can a normal dessicator be used?

I appreciate your replies.


Offline Mitch

  • General Chemist
  • Administrator
  • Sr. Member
  • *
  • Posts: 5298
  • Mole Snacks: +376/-3
  • Gender: Male
  • "I bring you peace." -Mr. Burns
    • Chemistry Blog
Re: hydrothermal conditions without an autoclave
« Reply #1 on: August 06, 2008, 02:42:56 PM »
Metal oxides of titanium should grow in air at 200-300 C without any problems. I've never heard of titanium ultrasonic horn, but you may wish to fish through these results:
http://scholar.google.com/scholar?q=titanium+ultrasonic+horn&hl=en&lr=&btnG=Search
Most Common Suggestions I Make on the Forums.
1. Start by writing a balanced chemical equation.
2. Don't confuse thermodynamic stability with chemical reactivity.
3. Forum Supports LaTex

Offline trinity23

  • Very New Member
  • *
  • Posts: 2
  • Mole Snacks: +0/-0
Re: hydrothermal conditions without an autoclave
« Reply #2 on: August 06, 2008, 02:52:57 PM »
But the procedure requires me to use hydrothermal conditions to get the final results.
Any suggestions on vacuum evaporator?

Thanks

Offline Mitch

  • General Chemist
  • Administrator
  • Sr. Member
  • *
  • Posts: 5298
  • Mole Snacks: +376/-3
  • Gender: Male
  • "I bring you peace." -Mr. Burns
    • Chemistry Blog
Re: hydrothermal conditions without an autoclave
« Reply #3 on: August 06, 2008, 07:21:28 PM »
Depends what you need to do in a vacuum evaporator? Most labs have a vacuum pump, and it couldn't take more than a few hours to cobble together a sealed box to place samples to evaporate in.
Most Common Suggestions I Make on the Forums.
1. Start by writing a balanced chemical equation.
2. Don't confuse thermodynamic stability with chemical reactivity.
3. Forum Supports LaTex

Sponsored Links