December 23, 2024, 09:56:06 AM
Forum Rules: Read This Before Posting


Topic: what kind of trap can I use to avoid ethyl acrylate smell ?  (Read 7916 times)

0 Members and 1 Guest are viewing this topic.

Offline karl26

  • Regular Member
  • ***
  • Posts: 10
  • Mole Snacks: +0/-1
what kind of trap can I use to avoid ethyl acrylate smell ?
« on: February 26, 2008, 08:20:54 AM »
Hi everybody,

I am doing a reaction involving a distillation of excess ethyl acrylate ( big scale reaction > 100 kg)

We are having problems with the smell of ethyl acrylate vapours (small quantities which comes out of the pump) even if we use a 10% NaOH scrubber


Does anyone know a more efficient way to trap ethyl acrylate vapours ?


thanks in advance

 ;)

Offline ARGOS++

  • Sr. Member
  • *****
  • Posts: 1489
  • Mole Snacks: +199/-56
  • Gender: Male
Re: what kind of trap can I use to avoid ethyl acrylate smell ?
« Reply #1 on: February 26, 2008, 08:36:41 AM »
Dear Karl26;

For “Vacuum Pumps” you should always use a “Cryogenic Trap” (even for large scaled).
In your case maybe you have to use “Liquid Nitrogen”.
But I believe: first you will have to clean your pump to be successful.

About “Cryotraps” you can read on:    "CryoPump
 

Good Luck!
                    ARGOS++


Offline PhosMAN30

  • Very New Member
  • *
  • Posts: 2
  • Mole Snacks: +0/-0
Re: what kind of trap can I use to avoid ethyl acrylate smell ?
« Reply #2 on: April 24, 2008, 12:53:27 PM »
Our group uses a rotovap specific for these occasions.  We keep it in the hood.  We also use a Welch model 2027 to remove DMF, DMSO, etc...

Offline Dlabs

  • Very New Member
  • *
  • Posts: 1
  • Mole Snacks: +0/-0
Re: what kind of trap can I use to avoid ethyl acrylate smell ?
« Reply #3 on: August 17, 2008, 10:15:33 AM »
We wash all of our glassware that was in contact with acrylates with a domestic hypochlorite solution (bleach). This probably oxidises the acrylate into something that can then be washed normally

Sponsored Links