December 22, 2024, 11:54:18 AM
Forum Rules: Read This Before Posting


Topic: Calculation of Enthalpy of neutralization  (Read 7570 times)

0 Members and 1 Guest are viewing this topic.

SudheerBallare

  • Guest
Calculation of Enthalpy of neutralization
« on: August 27, 2005, 01:10:31 PM »
hi friends,
I have been trying to solve the following problem for quite some time now and feel exhausted with the efforts now.

A waste containing 1% sulfuric acid (10,00mg/L) is neutralized by adding a concentration of lime slurry [ made by dissolving Ca(OH)2 (s) in water ]. if the water temperature is 15C before neutralization, what is it after neutralization?

[ well i was able to calculate enthalpy of neutralization as 55.85 kJ/mol but couldn't get thru to the temperature part. Aslo the answer is 17.7C but i don't know how to reach it.]
Any help provided will be gratefull acknowledged.

thnx

Offline Mitch

  • General Chemist
  • Administrator
  • Sr. Member
  • *
  • Posts: 5298
  • Mole Snacks: +376/-3
  • Gender: Male
  • "I bring you peace." -Mr. Burns
    • Chemistry Blog
Re:Calculation of Enthalpy of neutralization
« Reply #1 on: August 27, 2005, 01:47:05 PM »
I would of converted kJ to calories. And the amount of heat required to increase the temperature by 1 degree is defined as 1 calorie. But this method still won't get you the correct answer. ;)
Most Common Suggestions I Make on the Forums.
1. Start by writing a balanced chemical equation.
2. Don't confuse thermodynamic stability with chemical reactivity.
3. Forum Supports LaTex

Offline sdekivit

  • Chemist
  • Full Member
  • *
  • Posts: 403
  • Mole Snacks: +32/-3
  • Gender: Male
  • B.Sc Biomedical Sciences, Utrecht University
Re:Calculation of Enthalpy of neutralization
« Reply #2 on: August 27, 2005, 02:49:09 PM »
you must use the formula Q = c * m * delta T and calculate the heat released by the neutralization that is taken up by the solution.

Offline Mitch

  • General Chemist
  • Administrator
  • Sr. Member
  • *
  • Posts: 5298
  • Mole Snacks: +376/-3
  • Gender: Male
  • "I bring you peace." -Mr. Burns
    • Chemistry Blog
Re:Calculation of Enthalpy of neutralization
« Reply #3 on: August 27, 2005, 02:52:14 PM »
you must use the formula Q = c * m * delta T and calculate the heat released by the neutralization that is taken up by the solution.

Or you could use sdekivit textbook approach. ;)
Most Common Suggestions I Make on the Forums.
1. Start by writing a balanced chemical equation.
2. Don't confuse thermodynamic stability with chemical reactivity.
3. Forum Supports LaTex

Sponsored Links