December 26, 2024, 12:27:24 AM
Forum Rules: Read This Before Posting


Topic: Activity Question  (Read 3929 times)

0 Members and 1 Guest are viewing this topic.

Offline Magical

  • New Member
  • **
  • Posts: 3
  • Mole Snacks: +0/-0
Activity Question
« on: December 11, 2010, 05:34:47 PM »
 To a 1.00 litre solution of 0.01M Pb(NO3)2 was added 20.0 mmols of Na2SO4.
Determine the relative loss of Pb2+ from solution owing to precipitation of PbSO4.

I realize I am doing this wrong and I figure it's because I'm not calculating the ionic strength correctly.

u = 1/2 ([NO3-](Z)2 + [Na+](Z)2 + [SO42-](Z)2)

u = 1/2 ((0.02)(1-)2 + (0.04)(1+)2 + (0.02)(2-)2)
u = 0.07

(I was told I should be gettin 0.05... I don't know what i'm doing wrong)

If I was to obtain an ionic strength of 0.05... I would have an (alpha)Pb2+ of 0.45

And using the Debye-Hückel equation, the activity coefficient was calculated to be 0.45

Then the concentration of Pb2+ was calculated by using the solubility constant equation

Ksp = aPb2+ x aSO42-

[Pb2+] = Ksp/(activity coefficient2[SO42+])

[Pb2+] = 6.3*10-7 / (0.452*0.02) = 1.6*10-4
« Last Edit: December 11, 2010, 05:51:26 PM by Magical »

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27886
  • Mole Snacks: +1816/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Activity Question
« Reply #1 on: December 11, 2010, 05:54:33 PM »
How much SO42- is present in the solution?
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Magical

  • New Member
  • **
  • Posts: 3
  • Mole Snacks: +0/-0
Re: Activity Question
« Reply #2 on: December 11, 2010, 11:38:45 PM »
0.02 mol or 0.02 M since this occurs in a 1 L solution?

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27886
  • Mole Snacks: +1816/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Activity Question
« Reply #3 on: December 12, 2010, 06:17:37 AM »
No, that's what you have missed.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline AWK

  • Retired Staff
  • Sr. Member
  • *
  • Posts: 7976
  • Mole Snacks: +555/-93
  • Gender: Male
Re: Activity Question
« Reply #4 on: December 13, 2010, 06:04:57 AM »
You can obtain 0.05 when you assume the whole PbSO4 will precipitate (then you have 0.02 M NaNO3 and 0.01 M Na2SO4 in solution).For further calculation you should take into account the ionic strength and common ion effect (sulfate) - they work in different directions.
AWK

Sponsored Links