December 22, 2024, 06:59:30 AM
Forum Rules: Read This Before Posting


Topic: behaviour of sulphuric acid H2SO4  (Read 2802 times)

0 Members and 1 Guest are viewing this topic.

Offline kenny1999

  • Regular Member
  • ***
  • Posts: 85
  • Mole Snacks: +0/-4
behaviour of sulphuric acid H2SO4
« on: March 23, 2011, 05:20:42 PM »
i would like to know why sometimes sulphuric acid would react with KOH to give potassium sulphate (acid:alkali = 1:2 mole in reaction) but sometimes it would react with KOH to give potassium hydrogensulphate (so acid:alkali = 1:1).

I would like to know why the hydrogensulphate would not further ionize to give more Hydrogren, under what conditions would this occur?

Thank you guys!

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27885
  • Mole Snacks: +1815/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: behaviour of sulphuric acid H2SO4
« Reply #1 on: March 23, 2011, 06:27:29 PM »
It is all in stoichiometry, reaction always goes to the end. If you mix acid and base 1:1 you will get hydrogen sulfate, if you add 1.5:1, you will get mixture of both salts, if you will mix them 2:1, you will get just sulfate.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline DevaDevil

  • Chemist
  • Full Member
  • *
  • Posts: 690
  • Mole Snacks: +55/-9
  • Gender: Male
  • postdoc at ANL
Re: behaviour of sulphuric acid H2SO4
« Reply #2 on: March 24, 2011, 02:01:43 PM »
It is all in stoichiometry, reaction always goes to the end.

indeed, if you mix KOH and H2SO4 in a 1:1 ratio, you will have KOH as limiting reagent, meaning it will be used up before you can neutralize all of the acid.

Sponsored Links