November 24, 2024, 03:16:01 AM
Forum Rules: Read This Before Posting


Topic: Problem with drying a moist room (finding water content in a closed room)  (Read 4530 times)

0 Members and 1 Guest are viewing this topic.

Offline nitiyahhh

  • Very New Member
  • *
  • Posts: 1
  • Mole Snacks: +0/-0
the link below said that a 30-degree Celsius temp at saturated vapor density will contain vapor of about 30.4 grams per m\^3

[http://hyperphysics.phy-astr.gsu.edu/hbase/Kinetic/watvap.html#c1]

Does that mean the room with length = 220cm, width = 230cm, and height = 120cm will be  6,072,000 cm\^3  = 6.072 m\^3   >>>> 6\*30.4 = 182.4 g ??

but from what I have experimented with putting silica gel inside the room. I found that on the peak day, the weight of silica gel increased by approximately 12 grams/day (unknown relative humidity but surely higher than 95%)   >>>> If you absorb 12 g of water from the saturated air (182.4g), the relative humidity should decrease by about 6%  (I even further let my Farcent disposable dehumidifier increase its weight by 135g from absorbing water)


but what's wrong with my logic? the value displayed on the hygrometer doesn't even decrease a little bit
« Last Edit: June 20, 2023, 02:04:28 AM by nitiyahhh »

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27858
  • Mole Snacks: +1813/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
I doubt you room is sealed tight and doesn't exchange air with the surroundings.

Try with some kind of an empty and leak proof tank.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Sponsored Links