Given these redox equations:

2Al(s) + 3Cu²⁺(aq) <=> 2Al³⁺(aq) + 3Cu(s)    (1)

Al(s) + 3Ag⁺(aq) <=> Al³⁺(aq) + 3Ag(s)    (2)

and knowing that K2 > K1 and that the initial concentrations of Cu²⁺ and Ag⁺ are the same (let's call the initial concentration c), which reaction results in a higher concentration of Al³⁺ in the equilibrium?

I tried this:

Equilibrium (1):
x is the variation of the concentration of Cu²⁺ until the equilibrium is achieved

                     2Al(s) + 3Cu²⁺(aq) <=> 2Al³⁺(aq) + 3Cu(s)  
c(initial)/M                   c                   0
variation/M                -x                   +2/3 * x
c(equil)/M                  c-x                 2/3 * x


Equilibrium (2):
y is the variation of the concentration of Ag⁺ until the equilibrium is achieved

                    Al(s) + 3Ag⁺(aq) <=> Al³⁺(aq) + 3Ag(s)
c(initial)/M                   c                 0
variation/M                -y                 +1/3 * y
c(equil)/M                  c-y               1/3 * y

K1 = (2/3 * x)²/(c-x)³

K2 = (1/3 * y)/(c-y)³

Now given that K2 > K1 I don't know how to show that reaction (2) results in a higher concentration of Al³⁺ in the equilibrium, which is the answer to the exercise.

Let c be >>> y,x

Seems to me this assumption is wrong - both reactions will have equilibrium shifted far to the right. Compare half potentials for Al3+/Al, Cu2+/Cu and Ag+/Ag.

There should be some way to show that the expression for the Al³⁺ concentration (2=) is greater than (1).  I wonder what mathematical tools chemists use to compare such expressions (derivatives? limits?) because in this case it is not obvious just by simple inspection.

The problem is - the question is IMHO stupid.

Compare half potentials of Al, Cu and Ag. You don't have to remember them exactly to know, that the difference will be huge (to be precise - 2V for Al/Cu and 2.45 for Al/Ag). It means that K2 > K1, however, both K1 and K2 are so large, that you may treat the equilibrium as completely shifted to the products side. If so, only the stochiometry has any meaning and the information about K1 and K2 is not needed for anything.

Now, if you forget about the electronegativities, and you treat the problem just as you are told, you end with 3-rd degree equations. I have a gut feeling that even if you try to solve the problem mathematically you will not have a definitive answer, as the curves describing final concentrations vs K values will cross somewhere - and depending on the K1 and K2 values either first reaction or second will be giving larger Al(3+) concentration. In other words - my intuition tells me that without exact K1 and K2 values question can't be solved. But that's only intuition.

alright, so continuing from the previous post where we know the value of C

solving for K2 yields the equation

(2/3)x^2/(c-x)^3=K2, it's completely in terms of x

so [Al3+]=(2/3)x^2 for equation 2 and (4/9)x^2 for number 1.

the answer is equation number 2.  This situation is for where K2=K1, this assumption was made in the previous post.  Now if K2>K1, it would increasingly favor equation 2.  Try solving it out for yourself, the (c-y)^3 cancels out fortunately, to yield an equation completely in terms of x.  

There may have been a more simpler way to solve it, but this is quite simple enough for me.  Also, are you sure that your OP had the exact form of the question?  The question seems quite useless.

Looking at the reaction equation and ICE table it seems that [Al3+] = 2/3 x in the first case, not (2/3)x^2. There is some contradiction here. Unless x = 1.

Besides, C is not a constant - it is function of x and y.

what???  In the first case it's ((2/3)x)^2, which turns out to be 4/9x^2, this is for the first equation.

C was integrated into K2 to solve it in terms of x, and yes, all of the x and y attributes were taken care of.  The corresponding relative aluminum concentration turned out to be 2/3x^2.

Read the WHOLE post, and perform the calculations before you blatantly answer to my posts.

ahhh, I see, you're absolutely right.  That was stupid of me (bangs head on the wall).

so [Al3+] for the first equation is (2/3)x, while for the second, it is (4/9)x^2.

I'll be rechecking the calculations to see if there are any more brain farts.