December 22, 2024, 11:01:36 PM
Forum Rules: Read This Before Posting


Topic: Question plastic and salt  (Read 3434 times)

0 Members and 2 Guests are viewing this topic.

Offline gamemaniaco

  • Regular Member
  • ***
  • Posts: 11
  • Mole Snacks: +0/-0
Question plastic and salt
« on: October 11, 2020, 12:52:03 PM »
If in any piece of plastic there is some salt deposited in the plastic, will that salt dry out the plastic and damage it, making the plastic fragile?

Offline chenbeier

  • Sr. Member
  • *****
  • Posts: 1337
  • Mole Snacks: +102/-22
  • Gender: Male
Re: Question plastic and salt
« Reply #1 on: October 11, 2020, 01:03:47 PM »
I would say Yes, but how a salt should be deposited into the plastic.
Do you know how polymers are produced?

Offline gamemaniaco

  • Regular Member
  • ***
  • Posts: 11
  • Mole Snacks: +0/-0
Re: Question plastic and salt
« Reply #2 on: October 11, 2020, 01:40:52 PM »
I know that UV light and heat dry out the plastic but if salt particles are deposited on the plastic I don't know if the salt dries out the plastic

Offline chenbeier

  • Sr. Member
  • *****
  • Posts: 1337
  • Mole Snacks: +102/-22
  • Gender: Male
Re: Question plastic and salt
« Reply #3 on: October 11, 2020, 01:55:06 PM »
Again salt would also harm the plastic, but the question is how should it get into it.

Offline gamemaniaco

  • Regular Member
  • ***
  • Posts: 11
  • Mole Snacks: +0/-0
Re: Question plastic and salt
« Reply #4 on: October 11, 2020, 02:06:40 PM »
a piece of Tazo plastic usually has some trace of salt, if I store this piece with the salt trace will the salt dry out and make the plastic brittle?


Offline chenbeier

  • Sr. Member
  • *****
  • Posts: 1337
  • Mole Snacks: +102/-22
  • Gender: Male
Re: Question plastic and salt
« Reply #5 on: October 11, 2020, 02:46:55 PM »
These are DVD, they are made by Polycarbonat. Where does the salt comes from. If some is present, they will get brittle.

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27885
  • Mole Snacks: +1815/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Question plastic and salt
« Reply #6 on: October 11, 2020, 02:51:34 PM »
These are not DVDs.

My bet is salt is not "in" but "on". Just cleaning them with a wet rag should be OK.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline gamemaniaco

  • Regular Member
  • ***
  • Posts: 11
  • Mole Snacks: +0/-0
Re: Question plastic and salt
« Reply #7 on: October 11, 2020, 02:56:35 PM »
No, the salt is not inside the plastic but superficial, if the salt remains on the surface it dries out that plastic equal to sunlight and heat, salt dry out and crack this plastic?

Offline chenbeier

  • Sr. Member
  • *****
  • Posts: 1337
  • Mole Snacks: +102/-22
  • Gender: Male
Re: Question plastic and salt
« Reply #8 on: October 11, 2020, 03:37:55 PM »
These are not DVDs.

My bet is salt is not "in" but "on". Just cleaning them with a wet rag should be OK.

Instead only to say these are not DVD, you should also tell what it is instead.


Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27885
  • Mole Snacks: +1815/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Question plastic and salt
« Reply #9 on: October 11, 2020, 04:09:56 PM »
Instead only to say these are not DVD, you should also tell what it is instead.

OP already wrote what these are. Even if you have not ever heard about https://en.wikipedia.org/wiki/Tazos it is not that difficult to spot that they miss holes in the middle.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27885
  • Mole Snacks: +1815/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Question plastic and salt
« Reply #10 on: October 11, 2020, 04:13:38 PM »
No, the salt is not inside the plastic but superficial, if the salt remains on the surface it dries out that plastic equal to sunlight and heat, salt dry out and crack this plastic?

Most plastics are resistant enough, but if you have some more valuable pieces just clean them out to be on the safe side.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline gamemaniaco

  • Regular Member
  • ***
  • Posts: 11
  • Mole Snacks: +0/-0
Re: Question plastic and salt
« Reply #11 on: October 11, 2020, 06:07:10 PM »

I clean the tazos smas always leave a little salt deposited on the surface and this salt will cause damage to the plastic and dry out the plastic making it brittle?

Offline chenbeier

  • Sr. Member
  • *****
  • Posts: 1337
  • Mole Snacks: +102/-22
  • Gender: Male
Re: Question plastic and salt
« Reply #12 on: October 12, 2020, 01:35:38 AM »
Instead only to say these are not DVD, you should also tell what it is instead.

OP already wrote what these are. Even if you have not ever heard about https://en.wikipedia.org/wiki/Tazos it is not that difficult to spot that they miss holes in the middle.

My country is not on the list so I don't know them sorry. Ok some has no hole, but do they need it? A CD is not a vinyl record. But never mind.

And for the topic salt will not harm it, if it is outside on the surface.

Offline gamemaniaco

  • Regular Member
  • ***
  • Posts: 11
  • Mole Snacks: +0/-0
Re: Question plastic and salt
« Reply #13 on: October 12, 2020, 04:29:29 PM »
plastics undergoes any reaction when salt is on the surface?

Offline wildfyr

  • Global Moderator
  • Sr. Member
  • ***
  • Posts: 1776
  • Mole Snacks: +203/-10
Re: Question plastic and salt
« Reply #14 on: October 13, 2020, 10:38:07 AM »
Use distilled water to clean and it won't leave a residue. Small amounts of residual salt from tap water are harmless to such plastics.

Sponsored Links