November 23, 2024, 03:48:14 PM
Forum Rules: Read This Before Posting


Topic: Finding required volume  (Read 1731 times)

0 Members and 1 Guest are viewing this topic.

Offline NotSoBrightGuy

  • Very New Member
  • *
  • Posts: 2
  • Mole Snacks: +0/-0
Finding required volume
« on: November 12, 2022, 10:00:32 AM »
If I have a solution that follows:

22 Liters Non-Concentrated
18.5 Liters concentrated
= 1.2x Concentration factor

And I am required to put 1.4 Liters of Non-Concentrated volume between 13 other containers, How much volume of concentrated volume goes into each container?


Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27857
  • Mole Snacks: +1813/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Finding required volume
« Reply #1 on: November 12, 2022, 11:33:45 AM »
Please read the forum rules. You have to show your attempts at answering the question/solving the problem to receive help, it is a forum policy.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline NotSoBrightGuy

  • Very New Member
  • *
  • Posts: 2
  • Mole Snacks: +0/-0
Re: Finding required volume
« Reply #2 on: November 12, 2022, 12:36:57 PM »
My apologies.

I assume that I have to take the 1.42 per container and divide that by the concentration factor of 1.2

= 1.42/1.2
= 1.18


Which equals to 1.18x13= 15.38 total liters
Am I on track here?


Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27857
  • Mole Snacks: +1813/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Finding required volume
« Reply #3 on: November 13, 2022, 10:46:11 AM »
What you wrote is highly ambiguous. If I am _guessing_ right what you are doing, you are correct.

Do I understand correctly that the procedure to follow is to add enough water to 18.5 L of the concentrated to dilute it to 22L?

And that the question is: how much of the concentrated solution needs to be put into 1.4 L (1.42 L?)container so that after filling it up with water the final concentration is the same as in the first case?

If so, yes, 1.18 L seems to be about OK (give or take some rounding errors, probably negligible).
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Sponsored Links