December 23, 2024, 01:08:46 PM
Forum Rules: Read This Before Posting


Topic: H+ molarity vs. OH- molarity  (Read 7431 times)

0 Members and 1 Guest are viewing this topic.

Offline Jules18

  • Regular Member
  • ***
  • Posts: 88
  • Mole Snacks: +0/-3
H+ molarity vs. OH- molarity
« on: September 01, 2009, 05:58:39 PM »
Here's the question:

Quote
The ionization constant for acetic acid is 1.8E-5; that for hydrocyanic acid is 4E-10.  In 0.1 M solutions of sodium acetate and sodium cyanide, it is true that:

And the answer is:

Quote
[OH-] of the sodium acetate solution is less than that of the sodium cyanide solution.

Which makes sense to me, because acetic acid is the stronger acid.  But there's another option in the list that it says is NOT true:

Quote
[H+] exceeds [OH-] in each solution.

I thought this might be true, because both are solutions of chemicals that were referred to as acids. 
Am I missing the definition of an acid?

Offline MrTeo

  • Chemist
  • Full Member
  • *
  • Posts: 312
  • Mole Snacks: +31/-9
  • Gender: Male
Re: H+ molarity vs. OH- molarity
« Reply #1 on: September 02, 2009, 01:29:51 AM »
Do you really think that NaCN is an acid? Looks like a salt to me:

NaOH+HCN=NaCN+H2O

so if you consider its hydrolysis (and the reagents in the reaction above) you'll see why [OH-] exceeds [H+]...  ;)
The way of the superior man may be compared to what takes place in traveling, when to go to a distance we must first traverse the space that is near, and in ascending a height, when we must begin from the lower ground. (Confucius)

Offline Jules18

  • Regular Member
  • ***
  • Posts: 88
  • Mole Snacks: +0/-3
Re: H+ molarity vs. OH- molarity
« Reply #2 on: September 03, 2009, 10:49:58 AM »
... if it's not an acid, why did the question refer to it as an acid? 
Bad wording... ?


Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27887
  • Mole Snacks: +1815/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: H+ molarity vs. OH- molarity
« Reply #3 on: September 03, 2009, 10:54:57 AM »
No, bad understanding of the problem on your side.

There is a weak acid - say, acetic acid.

It is neutralized and creates a salt - acetate.

Acetate anion is a conjugate base of acetic acid.

So solutions we are talking about are not solutions of acids - but of their conjugate bases.

Solution of base is usually alkalic.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Jules18

  • Regular Member
  • ***
  • Posts: 88
  • Mole Snacks: +0/-3
Re: H+ molarity vs. OH- molarity
« Reply #4 on: September 03, 2009, 11:32:08 AM »
Thanks, that makes sense to me.

Except, does "alkalic" refer to group 1 or group 2 elements?
Do you mean that most chemicals that have those elements are bases?

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27887
  • Mole Snacks: +1815/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: H+ molarity vs. OH- molarity
« Reply #5 on: September 03, 2009, 12:09:56 PM »
I mean alkalic like "having high pH".
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Sponsored Links