Unknown #1 (bottle) is a cold-finger type condenser. It was particularly useful when there were a lot of dissolving sodium reductions - the cold finger was filled with dry ice and acetone, and ammonia was added as a gas, condensing on the cold-finger and dropping into the reaction vessel below. Sodium was then dissolved in the ammonia to make a reducing solution of sodium amide.
Unknown #2 (column) is a fractional distillation column from the days when rubber stoppers were used to hold glassware together.
Unknown #3 (column) looks like a Dean-Stark trap. Reactions which give off water can be driven to completion by running the reaction in refluxing benzene or toluene, which form low-boiling azeotropes with water. Any water formed in the reaction will be carried up to the tope of the column by the toluene or benzene, which will gather in the graduated section and separate, the water at the bottom and the solvent at the top. The stopcock on the sidearm allows you to drain the water (through the lower sidearm), and the graduations tell you how much water you've collected, giving you an indication of how far your reaction has progressed.
Hope this helps...
ChemBuddy | 
Chem Reddit | 
Topic: Glassware. What to do with it? (Read 9125 times)