November 24, 2024, 05:52:01 PM
Forum Rules: Read This Before Posting


Topic: Vapour pressure, am I on the right track?  (Read 4812 times)

0 Members and 2 Guests are viewing this topic.

Offline ladymonsterface

  • New Member
  • **
  • Posts: 3
  • Mole Snacks: +0/-0
Vapour pressure, am I on the right track?
« on: January 31, 2012, 09:37:36 PM »
Calculate the vapour pressure of a 5% by mass benzoic acid [C7H6O2 (aq)] in ethanol solution at 35˚C. The vapour pressure of pure ethanol at this temperature is 13.40 kPa.

so what I did was

first, I pretend that it was for 1 kg and found that in on kg there would be .409 moles of Benzoic acid and 20.6 moles of ethanol (which seemed like alot)
 
then
Xsolvant=mols of solvant/total moles
Xsolvant=20.6/20.682
Xsolvant=.996



Then
P=Xsolvant*Psolvant
P=.996*13.40
P=13.3


it just doesnt seem right, what did I do wrong?

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27861
  • Mole Snacks: +1813/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Vapour pressure, am I on the right track?
« Reply #1 on: February 01, 2012, 05:41:32 AM »
How many total moles?
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline ladymonsterface

  • New Member
  • **
  • Posts: 3
  • Mole Snacks: +0/-0
Re: Vapour pressure, am I on the right track?
« Reply #2 on: February 01, 2012, 12:02:13 PM »
How many total moles?

thats a slightly embarrassing mistake on my part ok, so if total mass is 21.009

then its 20.6/21.009
and that comes to .98

Then
P=Xsolvant*Psolvant
P=.98*13.40
P=13.14


so does it look right now?

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27861
  • Mole Snacks: +1813/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Vapour pressure, am I on the right track?
« Reply #3 on: February 01, 2012, 02:34:56 PM »
Numbers look reasonable - at least they are in the correct ballpark.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline ladymonsterface

  • New Member
  • **
  • Posts: 3
  • Mole Snacks: +0/-0
Re: Vapour pressure, am I on the right track?
« Reply #4 on: February 01, 2012, 09:10:02 PM »
Numbers look reasonable - at least they are in the correct ballpark.

Well check over them again anyway. Thanks alot :)

Sponsored Links