November 24, 2024, 01:10:49 PM
Forum Rules: Read This Before Posting


Topic: Electrolysis  (Read 13489 times)

0 Members and 1 Guest are viewing this topic.

Offline billnotgatez

  • Global Moderator
  • Sr. Member
  • ***
  • Posts: 4431
  • Mole Snacks: +224/-62
  • Gender: Male
Electrolysis
« on: June 06, 2004, 03:55:48 PM »
I am wondering if someone would comment on the use of various electrodes when doing electrolysis of water. Also some comments on use of catalysts such as sulfuric acid or sodium hydroxide with said electrodes.

Platinum
Gold
Silver
Carbon
Copper

Or any other kinds of electrodes

Regards,
Bill


chemicalLindsay

  • Guest
Re:Electrolysis
« Reply #1 on: June 07, 2004, 04:28:46 AM »
when doing the electrolysis of water you can generally use any metal electrode ,however if you add a little bit  sodium chloride to make a better electrolyte I would not suggest metal electrodes as the sodium chloride can cause weird things to happen to some electrodes ( I used iron one time and the iron startes going crazy and just disintergrating).Carbon electrodes are generally also good but however proper electrodes are best as carbon electrodes when having oxygen being deposited at them can actually react (though often unusual) to produce carbon dioxide gas (C+O2->CO2) (hint I learnt that from reading posts on this site).

Just on the last question ,what do you exactly mean by the "use of catalysts such as sulfuric acid and sodium hydroxide with said electrodes".Did you mean electrolytes instead of catalysts or am I Just missing or not understanding something here.
Good luck on your electrolysis experiment.
« Last Edit: June 07, 2004, 04:29:27 AM by chemicalLindsay »

Offline Scratch-

  • Retired Staff
  • Full Member
  • *
  • Posts: 232
  • Mole Snacks: +6/-4
  • Gender: Male
  • llamas, eat my bazooka!
Re:Electrolysis
« Reply #2 on: June 07, 2004, 10:50:17 AM »
Most metal electrodes erode during electrolysis and react with what’s in the solution. I use graphite electrodes but they still react in some cases, gold and platinum make really good electrodes but I haven’t been able to get some yet. I don’t think sulfuric acid is a catalyst per say but it makes the solution more conductive so the reaction proceeds faster.
Hydrochloric acid, guaranteed to make you lose weight!

Offline jdurg

  • Banninator
  • Retired Staff
  • Sr. Member
  • *
  • Posts: 1366
  • Mole Snacks: +106/-23
  • Gender: Male
  • I am NOT a freak.
Re:Electrolysis
« Reply #3 on: June 07, 2004, 12:47:48 PM »
Well, I have a few pieces of platinum wire, and you can see on the wire where chlorine gas generated during electrolysis of a sodium chloride solution began to corrode the wire.  It's not as bad as on my copper electrodes, but it's still very noticeable.
"A real fart is beefy, has a density greater than or equal to the air surrounding it, consists

Offline billnotgatez

  • Global Moderator
  • Sr. Member
  • ***
  • Posts: 4431
  • Mole Snacks: +224/-62
  • Gender: Male
Re:Electrolysis
« Reply #4 on: June 07, 2004, 09:25:21 PM »
Whenever I have seen electrolysis -- they used platinum electrodes and a tiny bit of sulfuric acid in the water
I assume they did this to prevent the eroding of the electrodes


Offline billnotgatez

  • Global Moderator
  • Sr. Member
  • ***
  • Posts: 4431
  • Mole Snacks: +224/-62
  • Gender: Male
Re:Electrolysis
« Reply #5 on: June 07, 2004, 10:34:57 PM »

Electrode Platinum and Catalyst Sulfuric Acid
Comment?

Electrode Platinum and Catalyst Sodium Hydroxide
Comment?

Electrode Gold and Catalyst Sulfuric Acid
Comment?

Electrode Gold and Catalyst Sodium Hydroxide
Comment?

Electrode Silver and Catalyst Sulfuric Acid
Comment?

Electrode Silver and Catalyst Sodium Hydroxide
Comment?

Electrode Carbon and Catalyst Sulfuric Acid
Comment?

Electrode Carbon and Catalyst Sodium Hydroxide
Comment?

Electrode Copper and Catalyst Sulfuric Acid
Comment?

Electrode Copper and Catalyst Sodium Hydroxide
Comment?


Offline jdurg

  • Banninator
  • Retired Staff
  • Sr. Member
  • *
  • Posts: 1366
  • Mole Snacks: +106/-23
  • Gender: Male
  • I am NOT a freak.
Re:Electrolysis
« Reply #6 on: June 07, 2004, 10:42:07 PM »
Electrode Platinum and Catalyst Sodium Hydroxide
Comment?  Your platinum may dissolve as platinum dissolves in hot alkali solutions
"A real fart is beefy, has a density greater than or equal to the air surrounding it, consists

Offline Mitch

  • General Chemist
  • Administrator
  • Sr. Member
  • *
  • Posts: 5298
  • Mole Snacks: +376/-3
  • Gender: Male
  • "I bring you peace." -Mr. Burns
    • Chemistry Blog
Re:Electrolysis
« Reply #7 on: June 07, 2004, 11:04:55 PM »
carbon should be fine in either case.
Most Common Suggestions I Make on the Forums.
1. Start by writing a balanced chemical equation.
2. Don't confuse thermodynamic stability with chemical reactivity.
3. Forum Supports LaTex

Sponsored Links