December 28, 2024, 08:22:35 PM
Forum Rules: Read This Before Posting


« previous next »
Pages: [1]   Go Down

Topic: High temperature adhesive  (Read 10359 times)

0 Members and 1 Guest are viewing this topic.

Offline granik

  • Regular Member
  • ***
  • Posts: 15
  • Mole Snacks: +0/-4
High temperature adhesive
« on: July 07, 2013, 10:48:21 AM »
Hello colleagues!  :)
I am happy to be here among colleagues. But i am not polymer chemist and I need your help.
I need develop high temperature adhesive for glueing metals.
This component should satisfy next conditions:
1. Temperaure of processing is not higher than 90 degrees C.
2. Short-term temperaure of processing service is 300 degrees C (not higher 1 minute)
3. Modulus of elasticity is not smaller than 4 gigapascal
Any ideas?  ???
Or you can advise some scientific articles or books?  ;)
« Last Edit: July 07, 2013, 11:11:30 AM by granik »
Logged

Offline curiouscat

  • Chemist
  • Sr. Member
  • *
  • Posts: 3006
  • Mole Snacks: +121/-35
Re: High temperature adhesive
« Reply #1 on: July 07, 2013, 10:50:11 AM »
Is this a school project? Or....?

What's wrong with current adhesives?
Logged

Offline granik

  • Regular Member
  • ***
  • Posts: 15
  • Mole Snacks: +0/-4
Re: High temperature adhesive
« Reply #2 on: July 07, 2013, 11:09:18 AM »
No, it is not school project. It is scientific work of post- graduate student, my friend, but he is not very good polymer chemist. He asked me about this problem. But I am not polymer chemist. I do not know about this problem.
What' s wrong with current adhesives? I do not know  ???
Logged

Offline curiouscat

  • Chemist
  • Sr. Member
  • *
  • Posts: 3006
  • Mole Snacks: +121/-35
Re: High temperature adhesive
« Reply #3 on: July 07, 2013, 11:14:59 AM »
Quote from: granik on July 07, 2013, 11:09:18 AM
No, it is not school project. It is scientific work of post- graduate student, my friend, but he is not very good polymer chemist. He asked me about this problem. But I am not polymer chemist. I do not know about this problem.
What' s wrong with current adhesives? I do not know  ???

Problem looks ill defined to me. In addition to my earlier question, I'd ask myself:

What are the design stresses in shear / tension that it has to support. What sort of metals? What service temperatures?
Logged

Offline granik

  • Regular Member
  • ***
  • Posts: 15
  • Mole Snacks: +0/-4
Re: High temperature adhesive
« Reply #4 on: July 07, 2013, 11:20:11 AM »
As far as I know- metal is Al (aluminum). I do not know more than I have written early.
May be you know some reviews or articles about adhesives in English?  ;)
Logged

Offline curiouscat

  • Chemist
  • Sr. Member
  • *
  • Posts: 3006
  • Mole Snacks: +121/-35
Re: High temperature adhesive
« Reply #5 on: July 07, 2013, 11:23:22 AM »
Quote from: granik on July 07, 2013, 11:20:11 AM
As far as I know- metal is Al (aluminum). I do not know more than I have written early.
May be you know some reviews or articles about adhesives in English?  ;)

Not me. But Google might. :)
Logged

Offline magician4

  • Chemist
  • Full Member
  • *
  • Posts: 567
  • Mole Snacks: +70/-11
Re: High temperature adhesive
« Reply #6 on: July 07, 2013, 03:55:06 PM »
no a solution, but maybe helpfull evenso:

Quote from: granik on July 07, 2013, 11:09:18 AM
It is scientific work of post- graduate student, my friend, but he is not very good polymer chemist.
so, if this is an information he just needs (for something else he's working on, with respective expertise), maybe even together with someone who could supply him with this very product "ready to use", her should start by looking at commercially available products for metal gluing: there is a broad range of those around.
 :rarrow: two component reactive glues, together with some initial coating / anchoring on the metal surfaces comes to mind.

... and for more specific demands / questions  I would try to contact the very producers of those systems, like 3 M, for example ( my personal experience with esp. these guys is great)


regards

Ingo
Logged
There is a theory which states that if ever anybody discovers exactly what the Universe is for and why it is here, it will instantly disappear and be replaced by something even more bizarre and inexplicable. There is another theory which states that this has already happened.
(Douglas Adams)

Offline Enthalpy

  • Chemist
  • Sr. Member
  • *
  • Posts: 4036
  • Mole Snacks: +304/-59
Re: High temperature adhesive
« Reply #7 on: July 08, 2013, 03:31:58 AM »
300°C is extremely difficult, and the chances to invent a new such adhesive are slim!

As a user, among existing ones, I imagine only polyimide for that temperature...
- The processing temperature may exceed 90°C
- 300°C are a lot even for them, but over a limited time OK.
- Exist as film also

http://www2.dupont.com/Packaging_and_Circuits/en_US/assets/downloads/pdf/HD-3007_ProcessGuide.pdf
http://www.polytec-pt.com/int/products/polyimide-adhesives/
http://www.intertronics.co.uk/products/polyimide_adhesives_01.htm
http://www.amazon.com/dp/B009KB67ZC
Logged

Offline granik

  • Regular Member
  • ***
  • Posts: 15
  • Mole Snacks: +0/-4
Re: High temperature adhesive
« Reply #8 on: July 08, 2013, 01:45:07 PM »
Dear Enthalpy!
I thank you for you advise. If you will have other articles, i will appreciate you  :D
Logged

Offline zhaozhguo

  • New Member
  • **
  • Posts: 3
  • Mole Snacks: +0/-0
Re: High temperature adhesive
« Reply #9 on: September 03, 2013, 10:05:36 PM »
Might you can try sol-gel inorganic adhesives.
Logged

Offline granik

  • Regular Member
  • ***
  • Posts: 15
  • Mole Snacks: +0/-4
Re: High temperature adhesive
« Reply #10 on: May 26, 2014, 02:31:35 AM »
Dear zhaozhguo!
May be you can advise example of sol-gel inorganic adhesive?
I will be appreciate  ;)
Logged

Offline marty63

  • Regular Member
  • ***
  • Posts: 17
  • Mole Snacks: +2/-0
Re: High temperature adhesive
« Reply #11 on: October 12, 2014, 10:44:28 AM »
I know that people have made geopolymer adhesives for this kind of thing.

www.researchgate.net/...Geopolymeric_adhesives.../5046351bf68879dfd...

Logged

Offline oldgit36

  • Very New Member
  • *
  • Posts: 2
  • Mole Snacks: +1/-1
Re: High temperature adhesive
« Reply #12 on: October 18, 2014, 04:39:07 AM »
Unless this is a temporary joining you may consider welding.
Logged

Offline billnotgatez

  • Global Moderator
  • Sr. Member
  • ***
  • Posts: 4431
  • Mole Snacks: +225/-62
  • Gender: Male
Re: High temperature adhesive
« Reply #13 on: October 18, 2014, 06:27:39 AM »
@oldgit36
Quote
Unless this is a temporary joining you may consider welding.
I would think that you suggestion conflicts with the original post
Quote
1. Temperaure of processing is not higher than 90 degrees C.
2. Short-term temperaure of processing service is 300 degrees C (not higher 1 minute)
Although the title of this thread is
Quote
High temperature adhesive

Logged

Offline marty63

  • Regular Member
  • ***
  • Posts: 17
  • Mole Snacks: +2/-0
Re: High temperature adhesive
« Reply #14 on: October 23, 2014, 02:27:14 PM »
Have a look at this:

http://www.scientific.net/MSF.643.143

As I say geopolymers have been used for this kind of thing. I.e. at temperatures unsuitable for epoxy resins etc.
Logged
Pages: [1]   Go Up
« previous next »
Sponsored Links