[asalam]

Hey, sorry im a newbie here, basically im helping a friend sell off boxes of glassware he has collected. I've spent about a week going through boxes of equipment trying to identify it. I seem to have had a chemistry crash course and managed to learn quite a lot however im stuck on a few pieces of equipment. hopefully i can get some help on identifying some of it on here? I plan to stick around the forums and learn what i can as i will be taking some of the distilling equipment myself and hope to learn about condensers and such.

The equipment i have identified so far is this:

Quickfit LIEBIG CONDENSER, C1/11 14/23
Quickfit LIEBIG CONDENSER, C1/11 19/26
Quickfit LIEBIG CONDENSER, C1/11 29/32
Pyrex Allihn Condenser 45/50 Lab Glass
Quickfit Reduction Adapters top female Joint: 24/29 29/32
Quickfit Reduction Adapters top female Joint: 24/29 34/35
Quickfit Reduction Adapters top female Joint: B29 B34/35
Quickfit Glass 250ml Dreschel Bottle MF29/3/250
SH1/11 Quickfit Glass Stillhead / Recovery Bend B14/23 Laboratory Glassware Lab
Corning 4320B-50 PYREX 100mL Round Bottom Boiling Flask
Corning 4320B-50 PYREX 250mL Round Bottom Boiling Flask (long neck)
PYREX 250mL Round Bottom Boiling Flask (short neck)
PYREX Boiling Flask 1000mL 2 neck round bottom 24/40 34/45
PYREX Brand 5640 25mL Volumetric flask
PYREX Gooch crucible, high form, with fritted disc – 50ml
PYREX Brand Buchner Funnel 15ml with Fritted Disc
PYREX reducing adapter 34/45 TO 19/38 M
PYREX Corning 2490-24  12 x 86mm Cold Finger Condenser with 24/40 Inner Joint, Drip Tube and Tubulation
Quickfit XA21 glass expansion adapter  19/26 14/23
Quickfit DA Glass reduction adapter 14/23 24/29
Glass expansion adapter 34/45 24/40
WESTERN 250ml Volumetric Flask Class A
WESTERN 100ml Volumetric Flask Class A
WESTERN 50ml Volumetric Flask Class A
Pyrex brand 36060 fritted funnel 150ml
Pyrex Friedrich condenser 55/50
Pyrex 350mL Gas Washing Bottle with Side Inlet and fritted disk
Kimax glass cylinder 58.3 cubic cm
 Pyrex straight bore stopcock No.8
Rotaflo 90° angle 2-way stop cock
90° angle 2-way stop cock
Large and Small Stop cock assembly
High Vacuum straight bore stock small
High Vacuum straight bore stock medium
High Vacuum straight bore stock large
High Vacuum straight bore glass stop cock 34
Pyrex 5160  flash chromatography column 100ml
EZSafe flash chromatography column fritted disk
Quickfit socket 7/16
Quickfit socket 10/19
Quickfit Spherical ball joint Female S13
Quickfit Spherical ball joint male S13
Spherical ball joint Female 23/15
Spherical ball joint Male 23/15
Pyrex Gooch Crucible with fritted disk
Claisen adapter
Quickfit pear shaped flask 50ml 14/23
Pyrex Micro filtering flask 125ml w/ Tubulation
Large Glass Spiral
Small round bottomed boiling flask
Large distilling column Jencon Silica
Millipore 300ml funnel
Kuderna-Danish Evaporator concentrator COMPLETE KIT

This is the stuff i cant work out what it is (apart from the Kurderna-Danish kit which i worked out after the photos were taken).



Image link http://postimg.org/image/dym3nss6j/

thanks so much and hope i can get some help, sorry if this is in the wrong category.

[billnotgatez]

could you post the picture again with the following change
photoshop a capital letter over each piece so we can say
letter A is blah blah

[asalam]

hey ill do that tomorrow thanks in advance

[asalam]

ok here is the picture



http://s24.postimg.org/8q6gqetdh/lab_misc_numbered.jpg

cheeers

[Archer]

I can't open the link, if you could attach the image using the additional options function then I can also send it to colleagues.

[billnotgatez]

thanks for trying
the picture comes up for me
without doing link
maybe my browser does tricks for me

[billnotgatez]

can you see this one
I uploaded it for @asalam

[Archer]

Number 8 in picture B looks like a cold finger condenser

 http://www.sigmaaldrich.com/catalog/product/aldrich/z164038?lang=en&region=GB

The image is quite low res and the lighting is poor so it is difficult to see what some of them are. I shall have a better look when I am on my work monitor.

[asalam]

Great cheers for the enthusiasm, i still draw a blank on most of them in the picture. ive also put up a load of stuff on ebay which ends tomorrow if anyone is interested they can be found here and on my ebay page

http://www.ebay.co.uk/itm/221292674835?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

[magician4]

# 3 picture B looks to me like the top of an ancient rotatory evaporator
(upper left corner of the picture)

(from: http://www.buechigmbh.de/Rotationsverdampfer_50_Jahre.8251.0.html )

regards

Ingo

[Archer]

# 3 picture B looks to me like the top of an ancient rotatory evaporator

My first job had one like that! Ancient though it was it out lasted some newer models.

[asalam]

Great thanks for the support so far. Im going to give another day this week to identifying some of the remaining kit then ill stick some of it for sale online